|
|
Happy JTAG AVR interface AVR is RISC microcontroller familly, with JTAG interface implmentation members. This is powerfull debug acces, but you need to have special hadrware for this interface. Also JTAG connector have to be implemented on your target board. The goal of this project is to implement JTAG iinterface by the easiest way is possible into youtr target.
There is only one standart FT232USB driver, which is connected to JTAG pins of your target AVR processor. This FT232 is also used for standart serial communication. All job is done on your PC , which emulates JTAG interface via FT232 BitBang mode. This allows you to control fuses, memory lock bits and initial software downloading by one exe programm at your PC, via USB, without any external HW necessarity. The performance is not as original specialized JTAG hardware, of course, but is enough to be used as initial tool for download one of "bootloader" routines into new , "clean" AVR for first time and continue with this bootloader via USB serial link for future AVR Flash software upgrade ....
The connection is simple (Click at picture to see it in full resolution) :
需要安装ft232的驱动才能用
HappyJTAG.rar
(238.45 KB, 下载次数: 0)
|
|
雷达卡
发表于 2014-10-14 10:59:48
QQ好友和群
QQ空间
腾讯微博
腾讯朋友
微信
收藏
分享
支持
反对
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
抢沙发
千斤顶
显身卡
发表于 2014-10-14 21:05:05
