|
|
The hardware is built around a microchip PIC18F2550, this microcontroller has on board USB capabilities. The schematic and PCB have been designed in Kicad, an open source EDA solution
The PCB files are available in Gerber format and the schematic in pdf in the download section so that you can open them with your favourite tool.
The interface to the target PIC processor uses TTL levels (0 and 5 volts) which limits the hardware to the PIC10, PIC12, PIC16, PIC17, PIC18 and dsPIC30 series of processors. The hardware (from version 0.3) is capable of creating levels for PIC24 / PIC33 / PIC18FXXJXX devices as well.
硬件电路部分
usbpicprog-hardware-0.3.2[1].zip
(782.92 KB, 下载次数: 39)
固件
firmware-0.4.2-beta.tar.gz
(174.79 KB, 下载次数: 32)
软件
UsbPicProg-x86-0.4.2-beta.part1.rar
(7.63 MB, 下载次数: 95)
UsbPicProg-x86-0.4.2-beta.part2.rar
(1.23 MB, 下载次数: 32)
最新软件可以到这里下
http://sourceforge.net/projects/usbpicprog/files/usbpicprog-software/
|
|
雷达卡
发表于 2011-5-4 13:50:38
QQ好友和群
QQ空间
腾讯微博
腾讯朋友
微信
收藏
分享
支持
反对
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
抢沙发
千斤顶
显身卡
发表于 2022-8-16 03:33:53
