标题: TI原厂的CC Debug [打印本页] 作者: liyf 时间: 2013-2-8 10:25 标题: TI原厂的CC Debug The CC Debugger can be used to debug and program the flash of any of the RF System-on-Chip
(SoC) devices from Texas Instruments (except the CC1010). The PC Tools available for these
purposes are the SmartRF Flash Programmer from Texas Instruments and IAR Embedded
Workbench for 8051 from IAR Systems.
It is also possible to control and run tests on the devices from SmartRF Studio. When using SmartRF
Studio, the debugger supports the CC2520 transceiver in addition to the SoC devices.
CC_Debugger_User\'s_Guide.pdf
(1.21 MB, 下载次数: 0)