DIY编程器网

标题: Reflow Toaster Controller [打印本页]

作者: liyf 时间: 2012-1-14 15:00
标题: Reflow Toaster Controller
Reflow Toaster Controller

Description:
The Reflow Toaster controller from Spark Fun Electronics. This board was specifically developed to control a toaster oven, hot plate, reflow oven, or other high power device. The unit comes as a kitwith all the needed components for a fully independent system. Runs on a PIC 16F88 with boot loader pre-loaded (no programmer required).
No system code is provided. We get you the hardware, you get the thrill of creating the control system yourself!
We do provide example C code (CC5X compilable) that demonstrates control of the LCD, reads the buttons, displays the temperature on the LCD, debugging output via RS232 to Screamer, and toggles the power relay. Relay can be mounted on PCB but we found that it is best to keep the relay as close to oven as possible running control wires back to the PCB. More information can be found in the Reflow Toaster tutorial.
As to be expected - we do not recommend this kit to anyone who is not familiar with electronics. The kit is entirely through-hole devices. However, when using the high-power relay, the user will need to splice into the AC power cable of the device you are attempting to control. This can be extremely dangerous causing death or dismemberment.

We cannot be held responsible for any damages caused by this kit - use at your own risk.

Features:

PIC 16F88 running at 8MHz
Thermocouple readings from -270 to +1372C
High power relay controls up to 220VAC @ 30A
16x2 LCD STN with Backlight (looks great!)
Three buttons for menu control
Status LED

Kits Includes:

Bare PCB
High power SPST-NO Relay
30" Type-K Thermocouple
16F88 Preloaded with Bloader
AD595AQ IC
16x2 LCD with Backlight
MAX232
Wall Power Supply
Small parts (caps, sockets, BJTs, connectors, etc)

Documents:

Reflow Toaster v2 Schematic
Example control code (HD44780, Relay, buttons, ADC temperature, printf, printf_lcd, RS232, etc).
Excellent Article by Kit Ryan
PIC Code for Kit Ryan's Article
Revised Code to access all steps (Hex)

作者: skybj4 时间: 2012-7-30 11:34
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

作者: fireoqy 时间: 2012-8-22 03:16
说的不错！

作者: zyh555 时间: 2012-9-16 09:58
控制器做的不错，就是第三项Excellent Article by Kit RyanPDF读不了。

作者: liyf 时间: 2012-9-16 22:35

zyh555 发表于 2012-9-16 09:58
控制器做的不错，就是第三项Excellent Article by Kit RyanPDF读不了。

1、文件下载不全，请下载本地后再看
2、换个pdf查看工具试试

作者: robter 时间: 2015-10-28 22:13
这个很好，学习学习

欢迎光临 DIY编程器网 (http://diybcq.com./)