DIY编程器网

标题: Eprom programmer for parallel port [打印本页]

作者: liyf 时间: 2011-12-11 08:41
标题: Eprom programmer for parallel port

Eprom programmer for parallel port

This programmer can programming all standard 8 bit EPROMs in range from 2716 (2 KByte, 24 pin) up to 278001 (1 MByte, 32 pin). It uses standard and cheap chips, most expensive part is Textool socket. Of course it's not indispensable using especially this type of socket.

Eprprgst.zip - software for Atari ST with source.

Component list:

IC : TL 497 - 1 ; 74HC00 - 1 ; 74HC14 - 1 ; 74LS06 - 1 ; 74HC377 - 4 ; 74HC541 -1
74HC574 - 2 ; CD 4555 -1 . Total 12 IC-s.
Transistor : NPN - 6 ; PNP -11 .

You may put on this positions practically any low power silicon transistor, only polarity is important. Characteristics should be about: max. current: 100mA or more, max. voltage: 30V or more.
Examples: NPN: BC237, BC548, BC337. PNP: BC307, BC558, BC327 etc.

LED : 2 piece .
Diode : 1N4148 - 11 ; Germanium or schottky -2 .
Zener diode : 3V - 4 ; 6V8 -1 ; 14V -1 ; 22V -1 ; 26V -1 ; 33V -2 .

欢迎光临 DIY编程器网 (http://diybcq.com./)