DIY编程器网

标题: PPWIN--并口版的pic编程器 [打印本页]

作者: liyf 时间: 2011-10-31 21:53
标题: PPWIN--并口版的pic编程器
PPWIN a Parallel Port PIC Programmer
A simple PC parallel port programmer for serial programming of MicroChips PIC micro's and I2C EEPROMS. Specifically designed for use with IC-Prog an advanced Windows program, WINPP supports programming of most modern 8/18/28 and 40 PIC devices.

PPWIN is based on my original tried and tested PP875 design. Which has been used by over 500 PIC developers around the world. The PPWIN hardware is identical to PP875 apart from the programming sockets and a small component change. So all of the original software, documents and FAQ's are still relevant. If you need a very simple programmer then have a look at the uJDM programmer.

Software
PPWIN is designed to work with IC-Prog 1.04 or above. This is a great Windows based programmer interface by Bonny Gijzen. Set the IC-Prog hardware to TAIT serial programmer with data out, data in and clock inverted. IC-Prog also includes a simple hardware test that will allow you to check your hardware connections.
Programmers File Editor - PFE by A.Phillips or Microchip's MPLAB can be used to create programs. You can configure PFE 'Execute DOS command' button to run the microchip MPASM assembler directly.

File	Ver	Date	Description	Size	Update Links
winpp84.zip	1.00	07/5/2001	Example PIC16F84 code .asm and .hex	2K
icprog.zip	1.05A	22/6/2003	Windows software driver for the programmer	535K	Bonny Gijzen
MPLAB			Microchip MPASM assembler and IDE		Microchip Home
pfe101i.zip	1.01i	22/4/2001	Integrated code development environment	608K	PFE home page

[size=+3]Building the Programmer
The PPWIN programmer is built on a single sided PCB as shown at the top of this page. The PCB layout is in a BoardMaker PCB, .BMP or direct and reverse Laser image file formats. I would recommend you use the direct Laser print file 'ppwin.prn' and follow these instruction showing How to Make PCB's if you have not done so before.
Obtain all the components shown on the parts list and populate the board using the PCB overlay and circuit diagram. All of the components are standard but if you can't find the ZTX transistors have a read of the FAQ. It is advisable to solder the stacked programming sockets together to stop them from coming apart. Alternatively use wire rap connectors with long leads to get the correct height above the PCB. If you want to make the programmer look a bit more professional then construct the programmer using the recommended plastic box. Print the box label onto sticky backed white paper then cover with transposeal to finish of the design.

File	Ver	Date	Description	Size
ppwinparts.txt	1.0	22/4/2001	Parts list	1K
ppwincct.bmp	1.0	6/5/2001	Circuit diagram	38K
ppwincmp.bmp	1.0	22/4/2001	PCB component overlay	20K
ppwinpcb.zip	1.1	6/5/2001	PCB layouts, all formats	41K
ppwinlbl.doc	1.0	22/4/2001	Box label in Word6 format	69K

[size=+3]Hardware Testing and Problems
I would strongly recommend that you build the programmer using the PCB layout provided as this will greatly reduce the probability of construction errors. Once you have made the board please follow these simple steps before you start programming.
PPWIN has been tested with the following Microchip parts:
PIC16C508, 16CE673, 16C71, 16C84, 16F84, 16C877, 24LC256
If you need help with the programmer PLEASE read the FAQ first as it contain information on testing, components, and software problems. There are now over 500 programmers in use so if you are having problems then you are probably doing something wrong: Faq.txt (7K)__

[size=+3]Documentation
Important documents that you will need are the PIC data sheet. There is a different data sheet for most PIC variants and you should download the latest document direct from the Microchip home site. I have included here the 16F84A data sheet as it covers most of the information you are likely to need in the first 34 pages. Unfortunately the standard 16F84 data sheet is now over 120 pages long.

File	Ver	Date	Description	Size
PIC16F84A.pdf		(c) 1998	PIC16F84A data sheet	495K
PIC16F8XXprg.pdf		(c) 1998	In-circuit-programming specs	355K

作者: hdzl 时间: 2011-11-1 08:29
表格形式上传。条理清晰，不知咋弄的。见识了！

作者: liyf 时间: 2011-11-1 08:39
高级模式，添加表格

作者: zydl123 时间: 2011-11-7 01:42
支持并口版的

欢迎光临 DIY编程器网 (http://diybcq.com./)