DIY编程器网

标题: Eprom Programmer 3.4 [打印本页]

作者: liyf 时间: 2011-5-22 07:04
标题: Eprom Programmer 3.4
This circuit is copyrighted by Batronix. You can build and use it for your own purposes but you are not allowed to trade with your own rebuilds!For the schematic and layout plans you need the highly recommended schematic and layout editor EAGLE. A free english version can be downloaded at http://www.cadsoft.de/freeware.htm.
Chip Support
NMOS Eproms
2764, 27128, 27256, 27512
CMOS Eproms
27C64, 27C128, 27C256, 27C512, 27C010, 27C020, 27C040, 27C080, 27C1001, 27C2001, 27C4001, 27C8001, 27C801, 87C257
EEproms
28C17, 28C64, 28C256
Flash
27SF256, 27SF512, 27SF010, 27SF020, 28F256, 28F512, 28F010, 28F020, 29C256, 29C512, 29C010, 29C020, 29C040
Zeropower and Timekeeper RAM
48Z08, 48Z18, 48Z30, 48Z35, 48Z58, 48Z128, 48Z512, 48T08, 48T18, 48T35, 48T59

EAGLE格式的原理图和pcb

eprommer_3_3.zip (25.81 KB, 下载次数: 17)

作者: jkj 时间: 2012-7-24 19:14
链接失效了。还应该有PC端程序吧？

作者: liyf 时间: 2012-7-24 21:45

jkj 发表于 2012-7-24 19:14
链接失效了。还应该有PC端程序吧？

该没找到，要不肯定上传的

作者: lusonlin 时间: 2021-2-13 12:50
谢谢楼主分享

欢迎光临 DIY编程器网 (http://diybcq.com./)